Vanton Pump & Equipment Corporation
Vanton SUMP-GARD OEM Thermoplastic Sump Pump Engineered for Semiconductor and OEM Applications


Vertical Centrifugal OEM Pumps

All standard SUMP-GARD® vertical centrifugal pump models detailed on SUMP-GARD product pages can be modified or fully engineered to satisfy the specific performance and dimensional parameters of your specialized OEM applications:
  • Flows: 10 to 900 gpm (2 to 204 m3/h)
  • Heads to 180 ft (55 m)
  • Lengths: 12 in. to 20 ft (30.5 cm to 6.1 m)
  • Temps to 275°F (135°C)
  • Construction: PP, PVC, CPVC, PVDF
  • Run-dry designs
  • Low profile designs
  • Corrosion-free across the entire pH range
  • Contamination-free handling of ultrapure liquids
  • Abrasion resistance
  • Available integrated with tanks, sensors
    and programmable controls
  • 100 Percent factory testing to conditions of service
    prior to shipment
Vanton SUMP-GARD OEM Thermoplastic Sump Pump Engineered for Semiconductor and OEM Applications
Ultra-compact, low-cost SGW series OEM pump

The low-cost SGW series OEM pump is engineered for use with standard wash down C-face motors. The SGW is the preferred choice for computer chip and wafer production, printed circuit board fabrication and other processes involving ultrapure water and chemicals.

SGH series OEM pump

This SUMP-GARD® SGH series OEM pump in lengths to 36 in. (91.4 cm) features an integral pump/motor shaft supported by large motor bearings, minimizing headroom requirements while allowing easy replacement of the plastic-sleeved stainless steel shaft. Please consult factory for flows and heads.

OEM pump/tank systems

OEM pump/tank systems are engineered for collecting and transferring corrosive fluids which vary in pH from two to seven. Each skid-mounted unit consists of two heavy-duty polypropylene (PP) SGH SUMP-GARD® OEM sump pumps with cantilevered shaft design, a motor, valves, level controls and piping. The hollow-shaft motors that drive the pumps are protected from corrosive fumes by non-metallic vapor seals.

Vertical centrifugal OEM recirculation pumps

Vanton SUMP-GARD® vertical centrifugal OEM recirculation pumps that circulate aggressive fluids that neutralize noxious emissions in industrial and municipal odor control applications. Each scrubber was equipped with duty and standby liquid recirculation pumps sized to maintain the proper degree of liquid-to-gas contact in the scrubber. Solid thermoplastic pumps and fluid-handling piping were selected due to their resistance to the acid, caustic and bleach used in the scrubber systems.

© Copyright 2011 | Terms and Conditions | Sitemap