Vanton Pump & Equipment Corporation
Vanton SUMP-GARD Vertical Centrifugal Pump Showing Cutaway of Thermoplastic Wet End Components

SUMP-GARD®

Vertical Centrifugal Pumps Overview

 
SUMP-GARD® vertical centrifugal pumps are available in lengths from 12 in. to 20 ft (.3 m to 6.1 m), and handle flows to 900 gpm (204 m3/hr), heads to 180 ft. (55 m) and temperatures to 275°F (135°C).

All fluid contact components are injection molded or fabricated of homogeneous polypropylene (PP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC) and polyvinylidene fluoride (PVDF) — corrosion resistant thermoplastics that are chemically inert to the fluids they are specified to handle. The heavy-duty stainless steel shaft is completely isolated from the fluid by a thick-sectioned thermoplastic sleeve, eliminating metal contact with the pumped fluid.

Unlike metals (including stainless steel, Hastelloy® and other high alloys) that have annual corrosion rates, Vanton

thermoplastics do not, allowing all liquids to be handled free of contamination, while maintaining the integrity of ultrapure liquids.

SUMP-GARD® vertical pumps are ideal for handling a broad range of corrosive, hazardous, toxic and otherwise aggressive fluids used throughout the processing and manufacturing industries, in utilities, and industrial and municipal water/wastewater treatment facilities — virtually any acidic, caustic, hazardous or unknown mixtures of waste/effluent or combination of fluids across the entire pH spectrum collected in tanks and sump pits.

Every Vanton pump is fully tested to verify performance with all data permanently recorded.

Vanton SUMP-GARD SG Thermoplastic Pump in Lengths to 20 Feet (6.1 Meter)
Vanton SUMP-GARD SGK Cantilevered, Bearingless Thermoplastic Sump Pump has Run Dry Capability
Vanton SUMP-GARD SGV Thermoplastic Pump with Vortex Head for Fluids Containing Solids
Vanton SUMP-GARD OEM Thermoplastic Sump Pumps Engineered for semiconductor and OEM applications
SUMP-GARD® SG SUMP-GARD® SGK SUMP-GARD® SGV SUMP-GARD® OEM
  General pumping
of corrosive, abrasive and ultrapure liquids
Cantilevered
bearingless pump
has dry run capability
Vortex pump head
for slurries and
solids laden fluids
Engineered pumps
for OEM applications
Flows to: 900 gpm
204 m3/h
850 gpm
193 m3/h
Consult factory 900 gpm
204 m3/h
Heads to: 180 ft
55 m
175 ft
53 m
Consult factory 180 ft
55 m
Lengths to: 20 ft
6.1 m
4 ft*
1.2 m*
20 ft
6.1 m
20 ft
6.1 m
Temps to: 275°F
135°C
275°F
135°C
275°F
135°C
275°F
135°C
Thermoplastics: PVC
CPVC
PP
PVDF
PVC
CPVC
PP
PVDF
PVC
CPVC
PP
PVDF
PVC
CPVC
PP
PVDF

* Deeper with tailpipe

© Copyright 2011 | Terms and Conditions | Sitemap