Vanton Pump & Equipment Corporation
Vanton CHEM-GARD OEM Thermoplastic Horizontal Centrifugal Pump Engineered for OEM Applications

CHEM-GARD®

Horizontal Centrifugal OEM Pumps

 
All standard CHEM-GARD® horizontal centrifugal pump models detailed on CHEM-GARD product pages can be modified or highly engineered to satisfy the specific cost, performance and dimensional requirements of your specialized OEM application:
 
  • Flows: 10 to 1150 gpm (2 to 261 m3/h)
  • Heads to 185 ft (56 m)
  • Temps to 275°F (135°C)
  • Construction: PP, PVC, CPVC, PVDF
  • Corrosion-free handling of across the entire pH range
  • Contamination-free handling of ultrapure liquids
  • Extreme abrasion resistance
  • Self-priming designs
  • Magnetic drive designs
  • ANSI and close-coupled designs
  • Vortex pump head designs for solids to 2 in. (51 mm)
  • Available integrated with tanks, sensors
    and programmable controls
  • 100 Percent factory testing to conditions of service
    prior to shipment
Vanton CHEM-GARD OEM Thermoplastic Horizontal Centrifugal Pump Engineered for OEM Applications
Horizontal centrifugal polypropylene OEM pumps

A major manufacturer of pH neutralization systems utilizes Vanton CGA thermoplastic OEM skid-mounted pumps in place of stainless steel pumps previously specified by the plant. The system consists of four horizontal centrifugal polypropylene OEM pumps, a custom-fabricated polypropylene (PP) treatment tank reinforced with epoxy-coated steel ribs, and CPVC pipes and fittings. The skid-mounted system rapidly neutralizes hot caustic concentrations, and handles 98 percent sulfuric acid.

Sealless, magnetically-driven polypropylene OEM pumps

Sealless, magnetically driven polypropylene OEM pumps transfer caustic solutions on demand for automated pH neutralization systems at municipal and industrial waste treatment plants. The pumps shown transfer caustic fluid from double wall storage tanks to a double wall day tank. These CGM 3 x 2 pumps transfer 55 gpm (12 m3/h) of sodium hydroxide against a 30 ft (9 m) total dynamic head. The pump casings, casing covers and impellers are injection molded of polypropylene.

© Copyright 2011 | Terms and Conditions | Sitemap